
Hilliard Local
Full Gutter Replacement: Properly Pitched, Built for Ohio Rain
When gutters fail, water finds the foundation. We fix it right before it gets worse.
Free estimate
Tell us what you need
Three fields. It reaches a person here, not a call centre.
Roofing and Gutters: The Complete Protection System
Failed gutters don't just look bad. They're actively directing water toward your fascia, foundation, and basement every time it rains. A full gutter replacement is the right call when sections are pulling away from the fascia, when seams are leaking on every rainfall, or when the pitch has shifted so far that water pools instead of drains. SOS Home Ohio installs complete gutter systems sized and pitched for your specific roofline and drainage load. We've handled everything from simple ranch homes to complex multi-valley rooflines across the Columbus metro, 49 five-star Google reviews back that up. Call 614-913-3809 for a free on-site assessment.
What drives gutter replacement cost? Profile size matters most, 5-inch K-style is standard on most homes, while 6-inch handles higher roof pitches and larger drainage areas. Downspout count and placement, linear footage, fascia condition (rotted fascia has to be replaced before any new gutter goes up), and whether you're adding gutter guards all affect scope. A straightforward replacement on a single-story home looks very different from a two-story colonial with multiple rooflines and corner pieces throughout. Every job is different, contact SOS Home Ohio for an accurate estimate.
Why It Fails
What Worn-Out Gutters Actually Do to a House
Most homeowners don't realize the damage is already happening behind the fascia board.
Signs You Need Replacement, Not Repair
Some gutter problems patch. These don't.
Gutters Pulling From Fascia
When hangers fail across multiple sections, the fascia itself is often rotted or deteriorated. Rehanging into compromised wood doesn't hold. The fascia needs replacement first, then new gutters go in.
Standing Water in the Channel
Gutters that sag and pool are pitched wrong. On a sectional system, you can't re-pitch individual sections without replacing them. A new continuous-run system gets the pitch right from the start.
Multiple Leaking Seams
Sectional gutters have a seam every 10 feet. When three or four seams on a single run are leaking, you're sealing and re-sealing indefinitely. Seamless gutters eliminate that problem entirely.
Rust, Holes, or Visible Cracks
Aluminum doesn't rust, but older galvanized steel gutters do. Any section with through-rust or cracked metal needs replacement. There's no patch that lasts more than one season.
Gutters Undersized for Your Roof
A 5-inch gutter on a steep-pitch roof with a large drainage area overflows in a heavy rain no matter how clean it is. Upsizing to 6-inch, or adding downspouts, is a replacement-level fix.
Our Process
How a Full Gutter Replacement Works
Three stages, no surprises.
- 01
Assessment and Measurement
We inspect fascia condition, measure linear footage, map downspout locations, and calculate drainage load based on your roof pitch and area. Fascia issues get identified before the quote, not during install.
- 02
Removal and Fascia Check
Old gutters come down. We inspect every fascia board before new material goes up. Rotted sections get replaced. New gutters don't go on compromised wood. That's a promise, not an option.
- 03
Installation and Pitch Verification
New gutters go up in continuous runs where possible, pitched to drain correctly. Downspouts are positioned to move water away from the foundation. We verify flow before we leave.
What a Complete Gutter System Includes
Full replacement covers the whole drainage path, not just the visible channel.
- 01
Gutter Channel (K-Style or Half-Round)
5-inch or 6-inch aluminum K-style is standard on most Columbus-area homes. Half-round is available for historic profiles. We stock both.
- 02
Downspouts and Extensions
Properly sized and positioned to handle your drainage load. Extensions direct water at least four feet from the foundation, farther on sloped lots.
- 03
End Caps, Corners, and Miters
Every termination point gets properly fitted components, not field-bent workarounds. Corners leak first on a sloppy install.
- 04
Hangers and Fasteners
Hidden hanger systems fastened into the rafter tails, not just the fascia. Holds the pitch long-term. Standard screw-and-spike systems loosen within a few years.
Pair It With Gutter Guards
The Gutters Are Part of the Roof System
- 01
Drip Edge
Channels water off the roof deck and into the gutter channel. Damaged or missing drip edge lets water travel back under the shingles.
- 02
Fascia and Soffit
The structural backing for the gutter. Rot here means no amount of new gutter hardware holds correctly. We check it every time.
- 03
Downspout and Grade
Where the water ends up matters. Downspouts discharging flat against the foundation are a basement water problem waiting to develop.
What Customers Say About Our Work




Common Gutter Replacement Questions
How do I know if my gutters need full replacement or just repair?
What gutter material do you install, and why?
How long does a full gutter replacement take?
Do I need to replace my fascia at the same time?
Can new gutters be installed over existing gutters?
How does gutter replacement connect to roof work or siding?
Do I need to replace my fascia at the same time as my gutters?
How does gutter sizing affect performance on Columbus-area homes?
Ready to Fix Your Gutter System?
Call SOS Home Ohio for an on-site assessment. We measure, we explain, and we give you a straight answer on what the job needs.